saizteknik

Here are the OE measurements of Track rods on standard Beetles Ghias Trekkers and Friddys All data is stock width measurements. Only show this user. Pin On D I Y I Wood Do This 2 Apr 14 2019 Edited Primary sheave is 100 ftlbs. Saiz thread nut clucth . The service manual says apply molybdenum disulfide grease to the outside surface of the pusher This sounds like it means the portion that is outside of the input shaft or perhaps they mean the ends only. Joined Feb 18 2012 68 Posts. I also did the 15 mm shim and a stiffer spring mod with great success for 1000 miles before upgrading to my current machined sheave. LHD 620mm 210mm this is the Track rod Rail only RHD. We have numerous taps and dies in BSC with 20. Parts manual dosent say either. 27MM and use a 6 point socket. Clutch boss nut-75 Nm 75 mkg 54 ftlb Clutch spring-8 Nm 8 mkg58 ftlb tighten in criss cross pattern in stages. I put trans in gear then lock the rear wheel I use a wooden hammer handle through the ...